Here is what you will need:

OR:

  • An SM1000 Digital Voice Adaptor
  • Cables to connect the SM1000 to your SSB radio

Connecting Your Radio

If you don’t have a built-in sound card for digital modes you can use the normal audio inputs and outputs of your radio. The same cables and hardware that you use for other digital modes that are based on PC programs will work with FreeDV, but you will need a second sound interface for the microphone and speaker connections to the FreeDV program. A USB headset of the sort used by gamers is all you need for the second sound interface.

Configuring Your Radio

Turn off as much processing as possible. In general, noise blankers, DSP band limit filtering and narrow bandpass filters are more likely to hurt than help, while compression, DSP noise or carrier elimination, and voice processing are definitely wrong for digital modes. FreeDV’s HF modem does its own DSP, and in general, this is true for other digital programs as well.

You can see the received effect of different settings in the S/N (signal-to-noise ratio) display of FreeDV. A higher S/N is better.

Drive your transmitter to an average power of about 20% of its PEP power. There is an 8-12 dB peak-to-average power ratio in our HF modem. Over-driving will reduce the received S/N. More is not better for DV!

Viewed: 197